Hawser Roller

Mooring lines, not stored on a mooring winch, require much space and might cause dangerous situations. The THR hawser roller is the solution to these problems. The hawser roller can be delivered in two different designs. The simple one allows easy storing in combination with moderate operation and material characteristics. The more advanced type is standard equipped with stainless steel shaft and polyamide bearings. A crank handle is delivered as standard on this type. The lines – steel or synthetic – can be stored on the reel in several layers. The reel itself can be manually or electrically operated. The hawser roller can be equipped with a foot brake. The hawser roller is normally built in standard steel, coated with a 2-layer primer. Application of a complete conservation system or galvanizing the roll is also possible.

  • Product Sheet

Technical Specification

  • LIGHT CONSTRUCTION
  • BIG CRANK HANDLE FOR MANUAL OPERATION
  • FOOTBRAKE OPTION
  • CRANK HANDLE ON BOTH SIDES POSSIBLE

Basic Specifications

  • 0kw
  • 0kg
  • 0mm
  • 0mm
  • 0kw
  • 0m/s
  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0kg
  • 0m/s
  • 0kw
  • 0mm
  • 0kw
  • 0mm
  • 0mm
  • 0mm
  • 0mm

Beads Parameter

  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0mm
  • 0mm

Production Capabilites

  • 0mm
  • 0m/min
  • 0m/min
  • 0mm

TEST JEROEN

  • kN